Tray Dryer

Tray Dryer Specification

Product Specification

Designed For Uniform Circulation Of Hot Air In The Drying Chamber. Electrical / Steam / Oil Heating Mode.
Inside Surface Is Painted With Heat Resistant Aluminum Paint And Out Side With Synthetic Enamel.
cGMP Models With SS 316 Construction, Single Page Design Fully Washable Type Models Available.
Inside Of The Dryer. If Consists Of Starters, Contactors, Safety Relays, Ckt Breakers, Indicating Lamps, Push Buttons , Timers, Controllers Etc. 

Construction

External Tray Dryer: 2mm Thick Internal: 2mm Thick Moc: CGMP

Surface Finish

External Tray Dryer: Buffed To 150 Grit Matt Finish Internal Tray Dryer: Buffed To 220 Grit Mirror Finish.

Inlet & Outlet:

Inlet And A Manually Infinite Adjustable Damper At The Outlet.

Door:

Doors At Provided At The Front And / Or Rear Side Of The Dryer. Door Lips Are Lined With Silicon Rubber Gasket To Prevent Any Leakages. Suitable Locking Is Provided For The Doors Of Tray Dryer.

Air Circulation:

Air Circulation Is Done By Specially Designed Recirculation Blowers Inside The Tray Dryer. The Blower Capacity, Static & Design Depends On The Size And Model Of Dryer.

Heating:

Dryers Are Normally Supplied With Either Steam/ Electric/ Thermic Fluid / Hot Water Heating System. Suitable Heating Coils / Caloriefiers Are Provided In The Tray Dryers.

Temperature Control

Temp Control System Is Done By Electronic Digital Temp Controller Fitted In The Control Panel. The Temp Control In The Dryer Is Fully Automatic.

Trays:

Trays Are Available In S.S. 304/ 316 Q. All Trays Are Fully Die Pressed And With Coved Corners. Trays Are Buffed To Mirror Finish.

Trolley:

Trolley Is Provided In The Tray Dryers To Accommodate Trays In It. Trolley Trucks Are Used To Load And Unload The Trays Into The Dryer.

Control Panel:

Automatic Control Panel Is Fitted On The Side Of The Dryer. If Consists Of Starters, Contactors, Safety Relays, Ckt Breakers, Indicating Lamps, Push Buttons , Timers, Controllers Etc.

Technical Specifications:

MODELS TD-12 TD-24 TD-48 TD-96 TD-192
Loading Capacity 12 Trays 24 Trays 48 Trays 96 Trays 192 Trays
External Dimension W D H In Mm  1370X530X940 1370X940X940 1980X1020X1880 3320X1900X1880  3320X1900X1880
Internal Dimension In Mm 840X430X840 840X860X840 1020X930X1830 1960X930 X1830 1960X930X1830
No Of Doors One One One Two Two
No Of Blowers One Two One Two Four
No Of Motors/H.P.3 PHASE 415 VOLTS. 1/0.5 H.P.3 Phase 415 Volts 1/0.5 H.P.3 Phase 415 Volts 1/1 H.P.3 Phase 415 Volts 2/1 H.P.3 Phase 415 Volts Four/1 H.P.each3 Phase 415 Volts
Electrical Heating
Load For
100°C/200°C /300°C
3kw/6kw/9kw 6kw/9kw/12kw 9kw/15kw/18kw 15kw/21kw/27kw 36kw/42kw/48kw
Steam Heater No. Of Coils. 2 2 2 2 2
Steam Pressure 3.3 Kg/cm2 3.3 Kg/cm2 3.3 Kg/cm2 3.3 Kg/cm2 3.3 Kg/cm2
Steam Consumption 25 LBS/hr 45 LBS/hr 60 LBS/hr 80 LBS/hr 120 LBS/hr
Insulation In Mm 100°C/ 200°C/ 300°C 50/75/75 50/75/75 50/75/75 50/75/75 50/75/75
No Of Trolleys Rack System Rack System One Two Four
Tray Size 812X 406 X 31 812X 406 X 31 812X 406 X 31 812X 406 X 31 812X 406 X 31
Trolley Dimension Fixed Racks Fixed Racks 840X960X1780 840X960X1780 840X960X1780

 

Contact Us